mast pedestal for a 17' SC help and advice needed
-
negrillive
- Novice
- Posts: 1
- Joined: May 26th, 2014, 8:43 pm
- Boat Make/Model: 1983 Supercat 17
mast pedestal for a 17' SC help and advice needed
My cat flipped off the trailer in a high wind. Flipped end over end. The mast pedestal ball assembly ripped. It is part 4208-0000 or part 6818-0000 (without the screws). The other parts that were damaged can be pieced together but this one is critical. Anybody have any contacts on where I might find this ? or even where I might have one made ? Its a solid one piece cast with that curve for the front beam.
-
Matt Haberman
- Administrator
- Posts: 610
- Joined: November 10th, 2003, 8:22 pm
- Location: Minnesota
- Contact:
Re: mast pedestal for a 17' SC help and advice needed
Hi,
All parts for your Super Cat are available from the factory. Please visit www.aquarius-sail.com or call 651-462-SAIL and they can help you out.
All parts for your Super Cat are available from the factory. Please visit www.aquarius-sail.com or call 651-462-SAIL and they can help you out.
-
SC15Av8or
- Professional
- Posts: 255
- Joined: December 24th, 2010, 10:00 am
- Boat Make/Model: SC15 / SC19
- Location: Richmond, Virginia
Re: mast pedestal for a 17' SC help and advice needed
negrillive......
I would not try to create that part. You are best following Matts advice and going right to the source for that.
I would not try to create that part. You are best following Matts advice and going right to the source for that.
Lifes 2 short for cheap GROG
SuperCat 15/19Av8or
SuperCat 15/19Av8or