Matt,
I'm still working on rigging the 15 with a spin--
Where do you attach the mast tang? I currently have one about a third of the way up the mast between the main tang and the head. The boat came that way, so I'm hoping I am lucky and it is in the right place.
Where do you attach the control blocks?
Do you have any pics of your set-up??
Spin questions SC 15
-
Matt Haberman
- Administrator
- Posts: 610
- Joined: November 10th, 2003, 8:22 pm
- Location: Minnesota
- Contact:
Re: Spin questions SC 15
Dan,
That sounds about right (1/3 up) for the spinnaker hounds.
The block location is going to be a function of the cut of the spinnaker. Depending on the cut of the spinnaker we have attached them to the rear beam, side stay or even the front beam, but again that location will be dependent on the size of the spinnaker.
That sounds about right (1/3 up) for the spinnaker hounds.
The block location is going to be a function of the cut of the spinnaker. Depending on the cut of the spinnaker we have attached them to the rear beam, side stay or even the front beam, but again that location will be dependent on the size of the spinnaker.