SC-19 VIN

General Sailing Discussion
Post Reply
blmnsailor
Novice
Posts: 3
Joined: July 12th, 2010, 8:36 pm
Boat Make/Model: SC-19

SC-19 VIN

Post by blmnsailor »

I've acquired an older SC-19, and I'm unable to locate anything recognizable as a VIN. I've checked the fore and aft beams and have seen nothing stamped or etched upon them. Even with the beams removed from the hulls, there was nothing marked into the hull beam saddles. The state registration is no help as it was a number made up by them, as the previous owner was also unable to locate a VIN. I am able to clearly see the mfg moulded numbers on each hull stern which shows the length, port and starboard designation and hull sequence number. My question is whether or not there remains any type of manufacturing record, based upon the hull sequence numbers, that may have been acquired from Boston Whaler or Erickson Yachts by Aquarius-Sail, that would show a factory assigned VIN? The hull sequence number is 128. Thank you.
Matt Haberman
Administrator
Posts: 610
Joined: November 10th, 2003, 8:22 pm
Location: Minnesota
Contact:

Re: SC-19 VIN

Post by Matt Haberman »

I don't think there is a record of hull #'s that ties them to the serial or VIN number your looking for.
Matt Haberman
Aquarius Sail Inc.
http://www.aquarius-sail.com
blmnsailor
Novice
Posts: 3
Joined: July 12th, 2010, 8:36 pm
Boat Make/Model: SC-19

Re: SC-19 VIN

Post by blmnsailor »

Thanks for the info.
Post Reply