I am finally finishing up a complete rebuild of a SC-15. This boat has a track for a mainsheet traveler with a car that ran across the aft beam. I see that most travelers on the SC 17 are wire travelers, should I switch systems or find a new car for the old system.
Second, I am having trouble with the installation of the tramp. Does anyone have a set of pictures of the tramp and how it is configured on the boat?
I appreciate any help, thanks
Rory
Tom, with Aquarius Sail has been working with me on the tramp issue, thanks Tom, but always nice to hear from others as well
SC-15 Tramp and mainsheet traveler
-
SailorRory
- Novice
- Posts: 2
- Joined: June 22nd, 2005, 8:42 pm
- Location: Colonial Heights, VA
-
Matt Haberman
- Administrator
- Posts: 610
- Joined: November 10th, 2003, 8:22 pm
- Location: Minnesota
- Contact:
Rory,
The cable travler was the original design on the Supercat product line. In about 1983 the cable travler was replaced with the Harken traveler track & car which is what you have if I am not mistaken. I would stick with what you have on your boat and either replace the bearings or car if necessary.
The cable travler was the original design on the Supercat product line. In about 1983 the cable travler was replaced with the Harken traveler track & car which is what you have if I am not mistaken. I would stick with what you have on your boat and either replace the bearings or car if necessary.