Avibank Pin

General Sailing Discussion
Post Reply
whalerman
Professional
Posts: 101
Joined: November 5th, 2007, 11:26 am
Boat Make/Model: SC 17, SC 15
Location: Hamburg, New York

Avibank Pin

Post by whalerman »

So the stainless wire securing the pins has deteriorated over the past 30 years to the point where it has actually broken on one of them. 30 years seems like a good long service life, I'm not complaining, but is the stainless wire what is now being used to attach the pins to the shroud extenders on new cats?
Kevin Keller
Professional
Posts: 363
Joined: September 24th, 2006, 2:56 am
Boat Make/Model: SC-20, ARC22
Location: Honolulu

Re: Avibank Pin

Post by Kevin Keller »

I just took some plastic covered stainless steel fishing line and some wire crimps and made new ones.
whalerman
Professional
Posts: 101
Joined: November 5th, 2007, 11:26 am
Boat Make/Model: SC 17, SC 15
Location: Hamburg, New York

Re: Avibank Pin

Post by whalerman »

I didn't know they made such a thing. Thanks :D
Kevin Keller
Professional
Posts: 363
Joined: September 24th, 2006, 2:56 am
Boat Make/Model: SC-20, ARC22
Location: Honolulu

Re: Avibank Pin

Post by Kevin Keller »

I think I picked up a crimper at Walmart or something like that in the fishing section and made them.
VI Mike
Novice
Posts: 9
Joined: July 30th, 2009, 10:24 pm
Boat Make/Model: SuperCat 22

Re: Avibank Pin

Post by VI Mike »

I just used regular monofilament. about 80lb leader material. The crimps are the same as the ones used to make leaders for gamefish rigs.
Post Reply