Search found 192 matches
- January 30th, 2009, 8:08 pm
- Forum: General Discussion
- Topic: Where are you?
- Replies: 11
- Views: 12405
Where are you?
Whee are the ARC21's located? Where do you race? What have you learned about your craft?
- January 12th, 2009, 8:28 pm
- Forum: Technical Forum
- Topic: Top Side Non Skid
- Replies: 1
- Views: 3024
Top Side Non Skid
during the painting prep process I knocked off most of the non skid on the decks to get to other areas that needed repair. Now I need to replace the non skid, I can see that the decks are gonna be slick. I have plenty of paint left and a can of Pettit non skid compound. Can you give me any tips to m...
- January 11th, 2009, 10:03 pm
- Forum: Technical Forum
- Topic: Mast Pre bend
- Replies: 2
- Views: 3478
Re: Mast Pre bend
I am using past experience with a Hobie 20 miracle where down haul was very dramatic. I suspect that the H-20 mast section is less rigid, tht would explain why I ripped the head grommet out of my first main sail.....
- January 7th, 2009, 6:47 pm
- Forum: Technical Forum
- Topic: Mast Pre bend
- Replies: 2
- Views: 3478
Mast Pre bend
It appears to me that there is very little pre bend in my mast as it is now. How much prebend should there be in an ARC21 mast sailing in Florida in 10 to 20 knot winds? I find that there is very little downhaul capability, is this a function of the lack of prebend?
Eric
2101
Eric
2101
- January 7th, 2009, 6:14 pm
- Forum: Technical Forum
- Topic: Powder coating
- Replies: 3
- Views: 4575
Re: Powder coating
What are the costs involved with powder coating beams? I love the idea.
- January 6th, 2009, 10:18 pm
- Forum: Technical Forum
- Topic: reassembly ARC21
- Replies: 4
- Views: 5148
Re: reassembly ARC21
or... is there another technique? I have a can of Pettit skidless compound that I intend to mix with the paint and roll on after taping off.
- January 6th, 2009, 8:00 pm
- Forum: Technical Forum
- Topic: reassembly ARC21
- Replies: 4
- Views: 5148
Re: reassembly ARC21
I want to reapply the non skid section next. Can this portion be rolled without reducer in the paint?
- December 29th, 2008, 7:49 pm
- Forum: Technical Forum
- Topic: reassembly ARC21
- Replies: 4
- Views: 5148
reassembly ARC21
When reassembling the beams onto the hulls, is there any special preparation of the bolts recommended? Grease? I there supposed to be silicone around the bolt holes to stop water intrusion? The aluminum blocks that are inside the beams have arrows on them, which way do they point? Rudder assembly, m...
- December 29th, 2008, 6:47 am
- Forum: General Discussion
- Topic: paint job!
- Replies: 0
- Views: 4958
paint job!
Finally, squirted the paint yesterday. I did get some orange peel because the compressor could not keep up with the gun but overall looks fine.
- September 10th, 2008, 8:59 pm
- Forum: General Discussion
- Topic: Mountable Video Cams
- Replies: 14
- Views: 13462
- June 2nd, 2008, 8:29 pm
- Forum: General Discussion
- Topic: How much do you sail?
- Replies: 7
- Views: 7784
sailing
Some years better thanothers. 4 kids$ so regular sailing is out f the question. I like to get the MKL, Mug, and Tradewinds at a mimimum. This year I have the boat inbits for painting, which has turned into long term project. The rain/humidity is prohibiting me from painting..... Dammmit Jim!
- June 1st, 2008, 12:14 pm
- Forum: Technical Forum
- Topic: Mid Pole Snuffer
- Replies: 3
- Views: 4343
spin set and retrieval
How about describing your sequence, maybe I'm doing it the hardway.....
Setting is easy for me, retreival is where I need to improve speed.
Setting is easy for me, retreival is where I need to improve speed.
- May 27th, 2008, 7:38 pm
- Forum: General Discussion
- Topic: sc 20 righting pole ?
- Replies: 15
- Views: 18770
righting
Same here,
I have righted the 21 with zero wind using the extenders.
Eric 2101
I have righted the 21 with zero wind using the extenders.
Eric 2101
- May 17th, 2008, 7:57 am
- Forum: Technical Forum
- Topic: Mid Pole Snuffer
- Replies: 3
- Views: 4343
Mid Pole Snuffer
Matt, Tom,
Is there any chance that a snuffer can or will be available for the ARC 21?
Eric Arbogast
2101
Is there any chance that a snuffer can or will be available for the ARC 21?
Eric Arbogast
2101
- April 14th, 2008, 7:29 pm
- Forum: Technical Forum
- Topic: What type of paint
- Replies: 8
- Views: 8772
Type of Paint
I bought 2008 Ford Creme Brulee PPG single stage and primer to go with. The weather has not cooperated so far plus I took this weekend off to Sail the Miami to Keylargo race (and back). It is gonna be a Beauty when I am finished. New paint, new tramps, new jib, new sheets, and next, new main...........